Tool-Adhesive & Sealant

Kafuter Adhesive Silicone Sealant

RoHS compliant- Quick-drying series, used in electronic appliances and other industrial products, rapid positioning and bonding

• Category  : Seal Material
• Appearance  : Milk viscous liquid
• State    : Semi-flow
• Surface Drying time minutes: ≤ 10
• Tensile strength Mpa : ≥ 2.0
• Shear strength MPa : ≥ 2.0

UPH Compounds Adhesive Tha Package:
Packaged in plactic bottle.

Application:
Squeeze out and apply directly to the prepared surface it.It cure in 3 seconds

Used On:
Any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper....
just about any porous and non-porous material.

UPH Compounds Adhesive

Application:
Squeeze out and apply directly to the prepared surface it. It cure in 3 seconds

Used On:
Any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper.... 

Gift Tool Adhesive The Package:
Packaged in two tubes. One contains liquid steel/epoxy resin, and the other contains hardener.
When mixed together in 2:1 portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel and with similar properties. 

Application:
Clean surface to be bonded. Squeeze out 2:1 portions of part A and B. Mix thoroughly. Apply it. 
It stays apliable for about 1 minutes after mixing, sets in just 4 minutes, and cures fully in 5 hours.
It's water-proof, petroleum, chemical-, and acid-resistant; resists shock, vibration, and extreme temperature fluctuation.

Used On:
Any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper....
just about any porous and non-porous material.
Specially Designed use in sealing or bonding subjects underwater or in constantly wet surfaces.
Ideal in sealing leaking in concrete / steel water tanks, leaking pipes, leaking fish tank.

UPH Adhesive Silicone Sealant

Features:

    This product is silicone adhesive sealant, non-solvent, no corrosion, no pollution, exposure to moisture cure at room temperature, the use of safe and convenient. With excellent moisture resistance, aging resistance and electrical insulation properties, temperature range -60 ℃ ∽ +250 ℃.

Uses:

    For electric heaters, temperature instrumentation, rice cookers, electric irons and other anti-oil spills, leaking adhesive seal. Also used in neon lights, energy saving lamps, television sets ignition coil for moisture sealing, anti-sparking and arcing and so on.

Usage:

    Do general cleaning surface treatment, adhesive bonding, can be cured at room temperature. Place the longer the better adhesion.

Gift Tool Adhesive

Kafuter Adhesive Silicone Sealant

RoHS compliant- Low torque, good permeability, no corrosion on the plastic, easy to operate, suitable for positioning, sealing, prevent moisture and loosing

• Color  : Gray
• Viscosity : 200 ~ 3000
• Solid content % : ≥ 25
• Dry time in minutes at (25 ℃) : 5
  

Kafuter Adhesive Silicone Sealant

RoHS compliant- Quick-drying series, used in electronic appliances and other industrial products, rapid positioning and bonding

• Category  :Seal Material
• Color  :Black
• state    :Semi-flow
• Suface Drying time (minutes)  :≤ 10
• Fully dried : 24 hours
• Tensile strength Mpa :≥ 2.0
• Shear strength MPa :≥ 2.0

UPH Adhesive Silicone Sealant This product is silicone  sealant for metal, not metal, electronic and electrical part