Kafuter

Features:

    This product is silicone adhesive sealant, solvent, no corrosion, no pollution, exposure to moisture cure at room temperature, the use of safe and convenient. With excellent moisture resistance, aging resistance and electrical insulation properties, temperature range -60 ℃ ∽ +250 ℃.

Uses:

    For electric heaters, temperature instrumentation, rice cookers, electric irons and other anti-oil spills, leaking adhesive seal. Also used in neon lights, energy saving lamps, television sets ignition coil for moisture sealing, anti-sparking and arcing and so on.

Usage:

    Do general cleaning surface treatment, adhesive bonding, can be cured at room temperature. Place the longer the better adhesion.

RoHS compliant- Non-dipping, no corrosion on the plastic, easy to operate, suitable for positioning, sealing, prevent moisture and screw loosing

• Color  : Red
• Viscosity : 12000 ± 1000
• Solid content % :  ≥ 40
• Dry time in minutes at (25 ℃) : 5

RoHS compliant- Low torque, good permeability, no corrosion on the plastic, easy to operate, suitable for positioning, sealing, prevent moisture and loosing

• Color  : Gray
• Viscosity : 200 ~ 3000
• Solid content % : ≥ 25
• Dry time in minutes at (25 ℃) : 5
  

RoHS compliant- Quick-drying series, used in electronic appliances and other industrial products, rapid positioning and bonding

• Category  :Seal Material
• Color  :Black
• state    :Semi-flow
• Suface Drying time (minutes)  :≤ 10
• Fully dried : 24 hours
• Tensile strength Mpa :≥ 2.0
• Shear strength MPa :≥ 2.0

RoHS compliant- Protective coating for electronic components,  bonding location and reinforcement, moisture-proof seal

• Category  : Seal Material
• Color   : White
• State    : Semi-flow
• Surface Drying time minutes: ≤ 10
• Fully dried  : 24 hours
• Tensile strength Mpa : ≥ 10
• Shear strength MPa : ≥ 0.80

RoHS compliant- Quick-drying series, used in electronic appliances and other industrial products, rapid positioning and bonding

• Category  : Seal Material
• Appearance  : Milk viscous liquid
• State    : Semi-flow
• Surface Drying time minutes: ≤ 10
• Tensile strength Mpa : ≥ 2.0
• Shear strength MPa : ≥ 2.0

RoHS compliant- Thermal silica, thermal conductivity of 0.8, for bonding components and heat radiators, heat generated by components derived

• Color  : Gray
• State    : Paste
• Suface Drying time minutes  : ≤ 30
• Fully dried : 24 hours
• Tensile strength Mpa : ≥ 2.5
• Shear strength MPa : ≥ 1.5