Tool- Handy & Electrical

The shape of the files:
1 x flat.
1 x 1 side flat and the other side round.
1 x square.
1 x triangular
1 x round.

Soldering Stand and Magnifier serve as a third hand

• This soldering holder is made of all steel materials with an 2.5 x optical Magnifying Glass

• Two adjustable locking arms with alligator jaws clip and magnifying glass can be turned to many angles.
• An indispensable aid for model makers, craftsmen, and electronic hobbyists
• Magnifying glass diameter: 90MM.
• Chrome-plated steel with heavy-weight cast-iron base to hold all steady and in place

Anti-static, powerful suction, light weight Aluminum-plastic construction desoldering pump

Spring-loaded plunger quickly removes solder in a single action.  Tools easily disassemble for fast cleaning.

It is easy to use, simply depress the plunger, place the tip of the nozzle against the solder you wish to remove. When the solder melts, push the release button and a retracting plunger creates a strong vacuum at the tip, removing the melted solder.

• Smokeless, odourless, non-toxic, no pollution.
• No water necessary
• Save energy, maintain temperature of the iron
• Faster working cycle
• Made of low abrasive brass shavings
• Cleans better than conventional sponges
• Won't damage your soldering tips
• No messy sponges to dispose of
• Cleaner tip has better heat transfer
  

650mm length flexible shaft to be mounted to the drill to extend the driving force / reach.

0.5 to 3.0mm collets ( not included) could be fitted to this flexible shaft.

Large Desoldering Pump Removal Tool

Large capacity spring-loaded plunger quickly removes solder in a single action.  Tools easily disassemble for fast cleaning, tip and "O" ring replacement

It is easy to use, simply depress the plunger, place the tip of the nozzle against the solder you wish to remove. When the solder melts, push the release button and a retracting plunger creates a strong vacuum at the tip, removing the melted solder.

Anti-static, powerful suction, light weight plastic construction desoldering pump

Spring-loaded plunger quickly removes solder in a single action.  Tools easily disassemble for fast cleaning.

It is easy to use, simply depress the plunger, place the tip of the nozzle against the solder you wish to remove. When the solder melts, push the release button and a retracting plunger creates a strong vacuum at the tip, removing the melted solder.

JELRDA 3 in 1 Gas Soldering Iron blow torch

• Weight: 90g
• Size: Length 19cm(with head) Diameter:2cm(body)
• Ignition method: Manual Ignition
• Temperature: Tip:210~400 Degree, Flame:1300 degree
• Capacity: 7ml
• Operating time: 30minutes(middle setting)

Three functions: Welding head,  Hot air , Fire

Features:

• 1, With a star nozzle, round, pointed tip, net change in head type nozzle 3.
• 2, No external power source, no voltage limit, free cable, available everywhere, is not baked long tail of new tools for welding
• 3, Rapid temperature adjustment, the tip temperature reached 210 degrees - 450 degrees, the equivalent of 25W-70W
• 4, Filling a butane can be used continuously for 30 minutes

Instructions:

• Install a proper size IC suction header
• Place the suction header level on IC
• Press the button on the suction pen to let out the air within the vacuum unit, then release to produce vacuum suction force to pick up IC
• Press the button discharging air to let the IC fall off the suction header