Laptop Spare Part

CPU load tester (mother board)

Description:
It is used to test each point and voltage of CPU is correct o939r not. After confirmed ok, then install genius CPU to avoid burn CPU down during repairing motherboard.

CPU load tester (mother board)

Description:
It is used to test each point and voltage of CPU is correct o939r not. After confirmed ok, then install genius CPU to avoid burn CPU down during repairing motherboard.

CPU load tester (mother board)

Description:
It is used to test each point and voltage of CPU is correct or not. After confirmed ok, then install genius CPU to avoid burn CPU down during repairing motherboard.

CPU load tester (mother board)

Description:
It is used to test each point and voltage of CPU is correct or not. After confirmed ok, then install genius CPU to avoid burn CPU down during repairing motherboard.

Application:
This product can detect all 478 interface board and the original board
This product is also suitable for Laptop P4

CPU load tester (mother board)

Description:
It is used to test each point and voltage of CPU is correct or not. After confirmed ok, then install genius CPU to avoid burn CPU down during repairing motherboard.

Application:
This product can detect all 775 interface board and the original board
This product is also suitable for CPU socket 771 interface

Handmade figure- This is a member of a team of Astral Warrior

• Material: all Anodized metal consisting plate, ball bearing, screw. pipe, chain, screw nut, washer, of various pieces, shapes and sizes.

• The upper body of this warrior could turn 360 degree.

• Since it is handmade, the figure could be approx 95% look like the photo.

• This is great for displaying, or as a gift.

Handmade figure- This is a member of a team of Astral Warrior

• Material: all Anodized metal consisting plate, ball bearing, screw. pipe, chain, screw nut, washer, of various pieces, shapes and sizes.

• The upper body of this warrior could turn 360 degree.

• Since it is handmade, the figure could be approx 95% look like the photo.

• This is great for displaying, or as a gift.

Handmade figure- This is a member of a team of Astral Warrior

• Material: all Anodized metal consisting plate, ball bearing, screw. pipe, chain, screw nut, washer, of various pieces, shapes and sizes.

• The upper body of this warrior could turn 360 degree.

• Since it is handmade, the figure could be approx 95% look like the photo.

• This is great for displaying, or as a gift.

Each Hug Light tip has 2 super-bright LEDs, one focused beam and one wide beam, so it’s right for any job

1, The foam-covered steel alloy arms are strong enough to hold the beam steady, yet flexible enough to point the light precisely where you need it

2, They’re so flexible, you can even coil the Hug Light like a snake and stand it up

3, Guys love it for home repairs and other jobs around the house

Technical Details
•  9-inch soft foam covered flexible wire arms
•  4 LEDs - 2 wide angle, 2 spot - super bright
•  Light Control - turn on 1,2,3 or all 4 LEDs
•  Stero Lighting/multi-point - Superior Illmumination, Less Shadow
•  2 AAA batteries - 40 hour battery life
•  Soft Rubber Grip Neck Pad

FOTGA Pro Optical Glass LCD Screen Protector for Canon 1100D

Description:

• This protector break out of the ordinary idea of protective products, initially bring the foreign ultra-thin professional optical glass materials and special treating process into. All these makes this product be of super-transparence, abrasion-resistance and scratch-résistance, high quality, Anti-collision, and easy-installing, and so on. The 6-layer protector film makes a perfect protection.

• The usage of importing 0.5mm ultra-thin optical glass material which is of high-transparence (more than 90% light transmitting rate) makes a clear imaging.
• The special treating process makes the surgical hardness of the protector be of near be 8H.
• The tolerance of 8kg/m2’s elastic pressure avoids the LCD screen from the damage of an abrupt impinging.
• The importing 3M double-side glue is of good tightness .Easy to install. The normal high or low temperature will make no impact on it, No bubble, no falling off under a normal usage.
• The special optical glass can effectively avoid the erosion of the sweat, oil and acid composition to lengthen the life of the LCD screen.
• The protector can disassemble, and reuse in the premise of no damage of the double-side glue.

Install:

• Open the package, and take the protector out, the peel off the plastic protecting film.
• Clear the LCD screens with a soft cloth, and make sure there are mo sweat, dust and oil on it.
• Peel off the sticker on the back of protector.
• Keep your camera in a stable place, put the protector softly align with two sides that is adjacent on the LCD screen. The check if the protector and screen align, If not, you can adjust them by the side. After confirmation, press the protector with even strength on the LCD screen. The clear the surface of the protector with a soft cloth.

Disassemble:

• If find stick not so good or want to peel it off, please insert a card (such as a business card) into the connecting part of the protector and the screen softly, Spin the card around the sides of the protector, and take apart the protector from the camera screen. Then peel the protector off softly. You can reuse it after clearing.

The professional protection of digital camera

• Import optical glass.
• Specialties technics disposal.
• Five special protections.
• Highlight Diamond quality.

Products Introduction:

• Design of the new professional protection is in stead of the traditional protection.
• The usage of importing 0.5mm ultra-thin optical glass material.
• Which made it have high diaphaneity, wearable, quality and it is easy to install.
• Have five special protections, anti-dusty, anti-scratch, anti-dirt, anti-aging, anti-strike
• Which protect the screen well. It is your good choose for your digital camera.

Installation Instructions:

• Take the protection from the plastic cover.
• Let the four sides or protection align with the screen of camera. Put it down.
• Take the glue of the protection off and confirm it without dustyand dirt thing.
• After confirm the four sides is suitable with the camera screen. Press it lightly. Then take the protection off.

The professional protection of digital camera

• Import optical glass.
• Specialties technics disposal.
• Five special protections.
• Highlight Diamond quality.

Products Introduction:

• Design of the new professional protection is in stead of the traditional protection.
• The usage of importing 0.5mm ultra-thin optical glass material.
• Which made it have high diaphaneity, wearable, quality and it is easy to install.
• Have five special protections, anti-dusty, anti-scratch, anti-dirt, anti-aging, anti-strike
• Which protect the screen well. It is your good choose for your digital camera.

Installation Instructions:

• Take the protection from the plastic cover.
• Let the four sides or protection align with the screen of camera. Put it down.
• Take the glue of the protection off and confirm it without dustyand dirt thing.
• After confirm the four sides is suitable with the camera screen. Press it lightly. Then take the protection off.