Laptop Parts-OEM

Note: This is not the original part. This is OEM made and compatible with the original part. Item condition is brand new.

Note: This is not the original part. This is OEM made and compatible with the original part. Item condition is brand new.

Note: This is not the original part. This is OEM made and compatible with the original part. Item condition is brand new.

Note: This is not the original part. This is OEM made and compatible with the original part. Item condition is brand new.

Note: This is not the original part. This is OEM made and compatible with the original part. Item condition is brand new. 

Laptop Mainboard Board DDR 2 RAM Memory Slot tester.

• Through the process of starting up and read the RAM Memory, could indicate the faults in the mother board circuit for further repairing.
• The fault could be reflected by the LED light, indicating open circuit or short circuit or data line and address line.

Usage:

• Install the 3.3v (CR2032) battery on the tester, mainboard need not power on, press the button of the tester.
• If the LEDs all light on and the brightness are all the same, the signal is all right ,there is no problem.
• No light Or weak light signal there is problem, you should refer to sign indication beside that LED light

Laptop Mainboard Board DDR 3 RAM Memory Slot tester.

• Through the process of starting up and read the RAM Memory, could indicate the faults in the mother board circuit for further repairing.
• The fault could be reflected by the LED light, indicating open circuit or short circuit or data line and address line.

Usage:

• Install the 3.3v (CR2032) battery on the tester, mainboard need not power on, press the button of the tester.
• If the LEDs all light on and the brightness are all the same, the signal is all right ,there is no problem.
• No light Or weak light signal there is problem, you should refer to sign indication beside that LED light

This tester is made specially for diagnose the fault of IBM laptop, apply to IBM laptop  Model:

•   T61, R61/I/E, T400/S, T500, X61/S, X200/S, W500, W700 series.

• Run the tester and refer the number code (result of Post) to the error code listed as below:

FF 00- CPU is not working, bios programme corrupted or no bios posting.
2C 28 2E 38- memory error, memory cicuit error, north bridge error.
4A- display card error.
49 55 90- South bridge error.
B6- bios is looked.

Laptop POST CODE Testing Card

• Supports three bus interfaces: MINI PCI, Mini PCI-E and LPC.
• Support LCD diaplay for English ( English User Guide included)

• Run the tester and refer the number code (result of Post) to the error code table in the User Guide for the fault the code indicates.
• Especially when the PC can't boot operating system, or blank screen, or the card and motherboard couldn't issue an audible beep.
• It can diagnosis signal which show the problem of CPU, Memory, display card and so on.
• The Display portion is composed with two 7-segment LEDs. The two "Dots" of the LEDs are used to indicate the notebook "RST" and "CLK" status. The left side "Dot" is for "RST", and the right side "Dot" is for "CLK".
• When the notebook is in "Reset" status, the left side Dot" will be lighted. And when the notebook has a correct CLK output, the right side "Dot" will be lighted.

Note: Please be aware that Mini-PCI-E is supported with limitation model of notebook, and the pin orientation must follow to PIN1-3.3V, PIN2-LFRAME#, PIN3-LAD3, otherwise, it need to test with other port, such as LPC or mini-pci.

The tester diagnose and analy the mother board,CPU and VGA card.
This card is also called POST( Power on self test ) Card.
No need software.

• Run the tester and refer the number code (result of Post) to the error code table in the User Guide for the fault the code indicates.
• Especially when the PC can't boot operating system, or blank screen, or the card and motherboard couldn't issue an audible beep.
• Work on desktop or laptop computers.
• USB port for power, 25 pin parallel printer port LPT for debug.

The tester diagnose and analy the mother board,CPU and VGA card.
This card is also called POST( Power on self test ) Card.
No need software.

• Run the tester and refer the number code (result of Post) to the error code table in the User Guide for the fault the code indicates.
• Especially when the PC can't boot operating system, or blank screen, or the card and motherboard couldn't issue an audible beep.
• Work on desktop or laptop computers.
• USB port for power, 25 pin parallel printer port LPT for debug.