UPH

7pcs  AGP PCI PCIE DDR1/2/3 SD Dummy Load for Desktop Motherboard repair

1pcs  AGP              Desktop  Dummy load
1pcs  PCI               Desktop  Dummy load
1pcs  PCI-E 16x      Desktop  Dummy load
1pcs  DDR              Desktop  Dummy load
1pcs  DDR2             Desktop  Dummy load
1pcs  DDR3             Desktop  Dummy load
1pcs  SD                Desktop  Dummy load

Destop computer Mainboard Board DDR RAM Memory Slot tester:

• Through the process of starting up ond read the RAM Memory, could indicate the faults in the mother board circuit for further repairing.
• The fault could be reflected  by the LED light, indicating open circuit or short circuit or data line and address line.

Usage:

• Install the 3.3v( CR2032) battery on the tester, mainboard need not power on, press the button of the tester.
• If the LEDs all light on and the brightness are all the same, the signal is all right ,there is no problem.
• No light Or weak light signals there is problem, you should refer to sign indication beside that LED light

Destop computer Mainboard Board DDR RAM Memory Slot tester:

• Through the process of starting up ond read the RAM Memory, could indicate the faults in the mother board circuit for further repairing.
• The fault could be reflected  by the LED light, indicating open circuit or short circuit or data line and address line.

Usage:

• Install the 3.3v(CR2032) battery on the tester, mainboard need not power on, press the button of the tester.
• If the LEDs all light on and the brightness are all the same, the signal is all right ,there is no problem.
• No light Or weak light signals there is problem, you should refer to sign indication beside that LED light

Description:
DDR 2 & DDR 3 Memory Slot tester is used to test open circuit or short circuit of PC mainboard memory slot. When the mainboard generate alarm for memory failure, while the memory would not work or when the mainboard work well and the memory size does not show enough, It can be used to test the error.

Remark: when testing motherboard memory slot, most repairers only test using a very expensive ram machine to diagnose it. This tester is suitable for some inital checking for the slot instead this kind of complex equipment. It is difficult to repair it successfully for using multimeter to test every slot footpin of motherboard. By using our tester, it is easy and save time to see the open circuit or short circuit point through the signal on board

It is powered by CR2032 or 20 pin power plug, it does not include the CR2032 battery.

• This card is also called POST( Power on self test ) Card.
• No need software.
• Run the tester and refer the number code (result of Post) to the error code table in the User Guide for the fault the code indicates.
• Especially when the PC can't boot operating system, or blank screen, or the card and motherboard couldn't issue an audible beep.
• USB port and 25 pin parallel printer port LPT for debug.