FOTGA Pro Optical Glass LCD Screen Protector for Sony a900
Description:
This protector break out of the ordinary idea of protective products, initially bring the foreign ultra-thin professional optical glass materials and special treating process into. All these makes this product be of super-transparence, abrasion-resistance and scratch-résistance, high quality, Anti-collision, and easy-installing, and so on. The 6-layer protector film makes a perfect protection.
The usage of importing 0.5mm ultra-thin optical glass material which is of high-transparence (more than 90% light transmitting rate) makes a clear imaging.
The special treating process makes the surgical hardness of the protector be of near be 8H.
The tolerance of 8kg/m2’s elastic pressure avoids the LCD screen from the damage of an abrupt impinging.
The importing 3M double-side glue is of good tightness .Easy to install. The normal high or low temperature will make no impact on it, No bubble, no falling off under a normal usage.
The special optical glass can effectively avoid the erosion of the sweat, oil and acid composition to lengthen the life of the LCD screen.
The protector can disassemble, and reuse in the premise of no damage of the double-side glue.
Install:
Open the package, and take the protector out, the peel off the plastic protecting film.
Clear the LCD screens with a soft cloth, and make sure there are mo sweat, dust and oil on it.
Peel off the sticker on the back of protector.
Keep your camera in a stable place, put the protector softly align with two sides that is adjacent on the LCD screen. The check if the protector and screen align, If not, you can adjust them by the side. After confirmation, press the protector with even strength on the LCD screen. The clear the surface of the protector with a soft cloth.
Disassemble:
If find stick not so good or want to peel it off, please insert a card (such as a business card) into the connecting part of the protector and the screen softly, Spin the card around the sides of the protector, and take apart the protector from the camera screen. Then peel the protector off softly. You can reuse it after clearing.
FOTGA Pro Optical Glass LCD Screen Protector for Sony DSC-H20
Description:
This protector break out of the ordinary idea of protective products, initially bring the foreign ultra-thin professional optical glass materials and special treating process into. All these makes this product be of super-transparence, abrasion-resistance and scratch-résistance, high quality, Anti-collision, and easy-installing, and so on. The 6-layer protector film makes a perfect protection.
The usage of importing 0.5mm ultra-thin optical glass material which is of high-transparence (more than 90% light transmitting rate) makes a clear imaging.
The special treating process makes the surgical hardness of the protector be of near be 8H.
The tolerance of 8kg/m2’s elastic pressure avoids the LCD screen from the damage of an abrupt impinging.
The importing 3M double-side glue is of good tightness .Easy to install. The normal high or low temperature will make no impact on it, No bubble, no falling off under a normal usage.
The special optical glass can effectively avoid the erosion of the sweat, oil and acid composition to lengthen the life of the LCD screen.
The protector can disassemble, and reuse in the premise of no damage of the double-side glue.
Install:
Open the package, and take the protector out, the peel off the plastic protecting film.
Clear the LCD screens with a soft cloth, and make sure there are mo sweat, dust and oil on it.
Peel off the sticker on the back of protector.
Keep your camera in a stable place, put the protector softly align with two sides that is adjacent on the LCD screen. The check if the protector and screen align, If not, you can adjust them by the side. After confirmation, press the protector with even strength on the LCD screen. The clear the surface of the protector with a soft cloth.
Disassemble:
If find stick not so good or want to peel it off, please insert a card (such as a business card) into the connecting part of the protector and the screen softly, Spin the card around the sides of the protector, and take apart the protector from the camera screen. Then peel the protector off softly. You can reuse it after clearing.
FOTGA Pro Optical Glass LCD Screen Protector for Sony HX-1
Description:
This protector break out of the ordinary idea of protective products, initially bring the foreign ultra-thin professional optical glass materials and special treating process into. All these makes this product be of super-transparence, abrasion-resistance and scratch-résistance, high quality, Anti-collision, and easy-installing, and so on. The 6-layer protector film makes a perfect protection.
The usage of importing 0.5mm ultra-thin optical glass material which is of high-transparence (more than 90% light transmitting rate) makes a clear imaging.
The special treating process makes the surgical hardness of the protector be of near be 8H.
The tolerance of 8kg/m2’s elastic pressure avoids the LCD screen from the damage of an abrupt impinging.
The importing 3M double-side glue is of good tightness .Easy to install. The normal high or low temperature will make no impact on it, No bubble, no falling off under a normal usage.
The special optical glass can effectively avoid the erosion of the sweat, oil and acid composition to lengthen the life of the LCD screen.
The protector can disassemble, and reuse in the premise of no damage of the double-side glue.
Install:
Open the package, and take the protector out, the peel off the plastic protecting film.
Clear the LCD screens with a soft cloth, and make sure there are mo sweat, dust and oil on it.
Peel off the sticker on the back of protector.
Keep your camera in a stable place, put the protector softly align with two sides that is adjacent on the LCD screen. The check if the protector and screen align, If not, you can adjust them by the side. After confirmation, press the protector with even strength on the LCD screen. The clear the surface of the protector with a soft cloth.
Disassemble:
If find stick not so good or want to peel it off, please insert a card (such as a business card) into the connecting part of the protector and the screen softly, Spin the card around the sides of the protector, and take apart the protector from the camera screen. Then peel the protector off softly. You can reuse it after clearing.
Compliant with PCI Express Base Specification, Revision 1.1
SuperSpeed (5.0Gbps) additional
USB 3.0 will offer a myriad of possibilities for applications requiring fast and high-capacity communication, while maintaining compatibility with USB 2.0
Driver supported MS Windows 98SE/ME/2000/XP/Server 2003/XP 64-bit/Vista/win7
