Gadget & Accessory

• This card is also called POST( Power on self test ) Card.
• No need software.
• Run the tester and refer the number code (result of Post) to the error code table in the User Guide for the fault the code indicates.
• Especially when the PC can't boot operating system, or blank screen, or the card and motherboard couldn't issue an audible beep.
• USB port and 25 pin parallel printer port LPT for debug.

2-port KVM- Connects 1 set of USB keyboard, USB mouse and video to 2 computers

Features:

• 1920 x 1440 maximum resolution
• 250 MHz bandwidth
• Manual switch
• LED indicators (PC1, PC2)
• Supports different interval latency auto-scan modes
• Plug and Play
• Hot-swappable

Requirements:

• Microsoft Windows 98/98SE/2000/ME/NT/XP/VISTA/XP 64bit/Vista 64bit/Win 7/Netware/Unix/Linux/Mac
• Available USB ports
• VGA monitor
• USB keyboard and mouse

Usage:

• Run operation systems with any compact flash memory card
• Convert your compact flash memory card to an IDE hard drive

• Support regular IDE connection
• Powered by 4 pins connection (floppy drive power connection)

PCI-Express Gigabit Lan Card

Description:

HX-108LE PCI-Express 10/100/1000M Gigabit Lan Card connect faster than ever with this PCI Express Gigabit Ethernet Network controller card. Optimize your computers performance with a RJ-45 Ethernet connection with data transfer rates of up to 1000Mbps.
 

Specification & Feature

• Model : HX-108LE
• Chipset: RTL8111C
• Support Plug and Play
• Connect faster than ever with this PCI Gigabit Ethernet Network controller card
• transfer rates up to 1000Mbps, optimize your computer's performance.
• Single-lane(x1) PCI-Express with transfer rate 2.5Gb/s Full Duplex channel
• Compliant with PCI-Express Revision 1.0a
• PCI Express x1 interface compatible with PCI Express x1 x4 x8 x16 slots
• Driver supported Windows 98SE/ME2000/XP/Server 2003/XP 64-bit/Vista/Vista 64-bit/Win 7/Win 7 64 bit
• 1000M Ethernet interface
• Support 10/100/1000 Base-T Networking with Auto-Negotiation
• Compliant with IEEEE 802.3, 802.3ab, 802.3u, 802.3x 802.1Q, VLAN
• Support Full Duplex Flow Control (IEEEE 802.3x)
• Automatic Crossover Detection and Correction Supported
• Transmit and Receiving FIFO of 1024 Package Buffer Each for Fast Operation
• Weight: 45g

The professional protection of digital camera

• Import optical glass.
• Specialties technics disposal.
• Five special protections.
• Highlight Diamond quality.

Products Introduction:

• Design of the new professional protection is in stead of the traditional protection.
• The usage of importing 0.5mm ultra-thin optical glass material.
• Which made it have high diaphaneity, wearable, quality and it is easy to install.
• Have five special protections, anti-dusty, anti-scratch, anti-dirt, anti-aging, anti-strike
• Which protect the screen well. It is your good choose for your digital camera.

Installation Instructions:

• Take the protection from the plastic cover.
• Let the four sides or protection align with the screen of camera. Put it down.
• Take the glue of the protection off and confirm it without dustyand dirt thing.
• After confirm the four sides is suitable with the camera screen. Press it lightly. Then take the protection off.

The professional protection of digital camera

• Import optical glass.
• Specialties technics disposal.
• Five special protections.
• Highlight Diamond quality.

Products Introduction:

• Design of the new professional protection is in stead of the traditional protection.
• The usage of importing 0.5mm ultra-thin optical glass material.
• Which made it have high diaphaneity, wearable, quality and it is easy to install.
• Have five special protections, anti-dusty, anti-scratch, anti-dirt, anti-aging, anti-strike
• Which protect the screen well. It is your good choose for your digital camera.

Installation Instructions:

• Take the protection from the plastic cover.
• Let the four sides or protection align with the screen of camera. Put it down.
• Take the glue of the protection off and confirm it without dustyand dirt thing.
• After confirm the four sides is suitable with the camera screen. Press it lightly. Then take the protection off.

The professional protection of digital camera

• Import optical glass.
• Specialties technics disposal.
• Five special protections.
• Highlight Diamond quality.

Products Introduction:

• Design of the new professional protection is in stead of the traditional protection.
• The usage of importing 0.5mm ultra-thin optical glass material.
• Which made it have high diaphaneity, wearable, quality and it is easy to install.
• Have five special protections, anti-dusty, anti-scratch, anti-dirt, anti-aging, anti-strike
• Which protect the screen well. It is your good choose for your digital camera.

Installation Instructions:

• Take the protection from the plastic cover.
• Let the four sides or protection align with the screen of camera. Put it down.
• Take the glue of the protection off and confirm it without dustyand dirt thing.
• After confirm the four sides is suitable with the camera screen. Press it lightly. Then take the protection off.

FOTGA Pro Optical Glass LCD Screen Protector for Nikon P90

Description:

• This protector break out of the ordinary idea of protective products, initially bring the foreign ultra-thin professional optical glass materials and special treating process into. All these makes this product be of super-transparence, abrasion-resistance and scratch-résistance, high quality, Anti-collision, and easy-installing, and so on. The 6-layer protector film makes a perfect protection.

• The usage of importing 0.5mm ultra-thin optical glass material which is of high-transparence (more than 90% light transmitting rate) makes a clear imaging.
• The special treating process makes the surgical hardness of the protector be of near be 8H.
• The tolerance of 8kg/m2’s elastic pressure avoids the LCD screen from the damage of an abrupt impinging.
• The importing 3M double-side glue is of good tightness .Easy to install. The normal high or low temperature will make no impact on it, No bubble, no falling off under a normal usage.
• The special optical glass can effectively avoid the erosion of the sweat, oil and acid composition to lengthen the life of the LCD screen.
• The protector can disassemble, and reuse in the premise of no damage of the double-side glue.

Install:

• Open the package, and take the protector out, the peel off the plastic protecting film.
• Clear the LCD screens with a soft cloth, and make sure there are mo sweat, dust and oil on it.
• Peel off the sticker on the back of protector.
• Keep your camera in a stable place, put the protector softly align with two sides that is adjacent on the LCD screen. The check if the protector and screen align, If not, you can adjust them by the side. After confirmation, press the protector with even strength on the LCD screen. The clear the surface of the protector with a soft cloth.

Disassemble:

• If find stick not so good or want to peel it off, please insert a card (such as a business card) into the connecting part of the protector and the screen softly, Spin the card around the sides of the protector, and take apart the protector from the camera screen. Then peel the protector off softly. You can reuse it after clearing.