Gadget & Accessory

Description:

• Lightweight Earpick with internal torch with Plastic Transparent thick and thin ear picks and tweezers
• Internal torch illuminates to facilitate inspecting the inner ear and helps to remove ear wax safely
• Thick and thin ear picks suit different ear hole sizes of adults and children
• Tweezers are equipped to catch bigger earwax
• LED Lighting Earpick stops ear Itchiness without potential hurts
• After dismounting the transparent spoon part tweezers or other accessories, it can be used as a torch.
• Rotate the outer case of the Lighted Earpick to make the two arrows point to each other, the spoon part will illuminate.
• If the accessories are not used for a long period, store them in the tube at the end of the Light Earpick.
• Powered by three AAA battery button cells.
• Color: as photo shown
• Handle Length: 13.5cm(Approx.)
• Weight: 34g

Package Content:

• 1 x LED Lighting Earpick handle
• 1 x Thick ear pick
• 1 x Thin ear pick
• 1 x pair of Tweezers

AC/DC Multimeter Voltmeter Ohmmeter Ammeter

This clamp meter uses large scale integration and unique function circuits.

It can measure AC Voltage, DC Voltage, AC Current, resistance, and fulfill audible continuity test. With the function of phase indication and identifying live-wire, this clamp meter is an ideal instrument for electricians.

General Specifications
Display: 3.5 digital LCD with a MAX reading of 1999, Auto polarity display
Measure method: double integral A/D switch inplement
Sampling speed: 2 times per second
Over-load indication: "1" is displayed
operating Envionment: 0℃~40℃,at<80%RH
Storage Environment: -10℃~50℃,at<85%RH
Power: 2 size AAA batteries (Not include)
Low battery indication: support
Static electticity: anout 4mA
Clamp dimension: 25mm for open jaw; 35mm for inner diameter

Continuity Test
Open Circuit ＞2.8V, Buzzer <(50±20)Ω

Phase Indication (50Hz)
Range: AC380V±10%, Phase indication: OK/Reversal/MISS, Accuracy ±3%

Live Wire Test
Range: 180V~400V, Live wire detect: LIGHT or LCD indication

Product Information
Buffalo AirStation WLI-PCM-L11G

General
Device Type: Network adapter
Form Factor: Plug-in module
Interface (Bus) Type: PC Card
Width: 5.4 cm
Depth: 11.8 cm
Height: 0.5 cm
Weight: 45 g

Networking
Connectivity Technology: Wireless
Data Link Protocol: IEEE 802.11b
Spread Spectrum Method: DSSS
Data Transfer Rate: 11 Mbps
Frequency Band: 2.4 GHz
Compliant Standards: IEEE 802.11b, Wi-Fi CERTIFIED

Aerial
Antenna: Internal integrated

Manufacturer's product description
The Buffalo 11Mbps Flat Wireless PCMCIA Card (WLI-PCM-L11G) consists of both LAN and radio functions. This PCMCIA card is necessary for wireless communication between the AirStation access point and the client. The client card is for either notebook PCs or desktop PCs (with PCI adapter).

Expansion / connectivity
Interfaces: 1 x network - Radio-Ethernet
Compatible Slots: 1 x PC Card - type II

Environmental parameters
Min Operating Temperature: 0 °C
Max Operating Temperature: 55 °C
Humidity Range Operating: 20 - 80%

5mW 532nm Red Beam Laser Pointer Pen

• Well tested and high quality red laser pointer.
• Easily to use, only need to push the button then you can see striking red beam of light shoot forth. The light can point at any targets, such as photos, blackboard, video monitors and so on.
• Best choice for teachers, professors, doctors, and so on.
• Clearly visible in the dark.

Specifications:

• Output Type: Fixed focus, continuous output and working time of over 5,000 hours
• Size: 160x14mm Dia.
• Output power: 5mW
• Works with 2 x AAA batteries (not include)

Caution: Avoid direct eye exposure

Material: Anodized natural color on casted aluminum.

This is an ornaments, not an actual handy tool

Toilet Lighter

Material: Color coating on cast alloy steel

• Refillable Lighter
• With adjustable flame
• Refillable lighter takes regular lighter gas (Exclude)

Best gift for smoker or take it as collectible item.

Material: Anodized Cast Alloy Steel

Material: Anodized Cast Alloy Steel